10 reasons why
PCs crash
Fatal error: the
system has become unstable or is busy," it says. "Enter to return to
Windows or press Control-Alt-Delete to restart your computer. If you do this
you will lose any unsaved information in all open applications."
You have just
been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be
familiar with this. What can you do? More importantly, how can you prevent it
happening?
1 Hardware
conflict
The number one
reason why Windows crashes is hardware conflict. Each hardware device
communicates to other devices through an interrupt request channel (IRQ). These
are supposed to be unique for each device.
For example, a
printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1
and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for
itself.
If there are a
lot of devices, or if they are not installed properly, two of them may end up
sharing the same IRQ number. When the user tries to use both devices at the
same time, a crash can happen. The way to check if your computer has a hardware
conflict is through the following route:
*
Start-Settings-Control Panel-System-Device Manager.
Often if a device
has a problem a yellow '!' appears next to its description in the Device
Manager. Highlight Computer (in the Device Manager) and press Properties to see
the IRQ numbers used by your computer. If the IRQ number appears twice, two
devices may be using it.
Sometimes a
device might share an IRQ with something described as 'IRQ holder for PCI
steering'. This can be ignored. The best way to fix this problem is to remove
the problem device and reinstall it.
Sometimes you may
have to find more recent drivers on the internet to make the device function
properly. A good resource is www.driverguide.com. If the device is a soundcard,
or a modem, it can often be fixed by moving it to a different slot on the
motherboard (be careful about opening your computer, as you may void the
warranty).
When working
inside a computer you should switch it off, unplug the mains lead and touch an
unpainted metal surface to discharge any static electricity.
To be fair to
Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem
going back to the first PC designs using the IBM 8086 chip. Initially there
were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of
them. There are plans to increase the number of IRQs in future designs.
2 Bad Ram
Ram
(random-access memory) problems might bring on the blue screen of death with a
message saying Fatal Exception Error. A fatal error indicates a serious
hardware problem. Sometimes it may mean a part is damaged and will need
replacing.
But a fatal error
caused by Ram might be caused by a mismatch of chips. For example, mixing
70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run
all the Ram at the slower speed. This will often crash the machine if the Ram
is overworked.
One way around
this problem is to enter the BIOS settings and increase the wait state of the
Ram. This can make it more stable. Another way to troubleshoot a suspected Ram
problem is to rearrange the Ram chips on the motherboard, or take some of them
out. Then try to repeat the circumstances that caused the crash. When handling
Ram try not to touch the gold connections, as they can be easily damaged.
Parity error
messages also refer to Ram. Modern Ram chips are either parity (ECC) or non
parity (non-ECC). It is best not to mix the two types, as this can be a cause
of trouble.
EMM386 error
messages refer to memory problems but may not be connected to bad Ram. This may
be due to free memory problems often linked to old Dos-based programmes.
3 BIOS settings
Every motherboard
is supplied with a range of chipset settings that are decided in the factory. A
common way to access these settings is to press the F2 or delete button during
the first few seconds of a boot-up.
Once inside the
BIOS, great care should be taken. It is a good idea to write down on a piece of
paper all the settings that appear on the screen. That way, if you change
something and the computer becomes more unstable, you will know what settings
to revert to.
A common BIOS
error concerns the CAS latency. This refers to the Ram. Older EDO (extended
data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2.
Setting the wrong figure can cause the Ram to lock up and freeze the computer's
display.
Mcft Windows is
better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers
to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make
sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow
Windows to do this.).
4 Hard disk
drives
After a few
weeks, the information on a hard disk drive starts to become piecemeal or
fragmented. It is a good idea to defragment the hard disk every week or so, to
prevent the disk from causing a screen freeze. Go to
*
Start-Programs-Accessories-System Tools-Disk Defragmenter
This will start
the procedure. You will be unable to write data to the hard drive (to save it)
while the disk is defragmenting, so it is a good idea to schedule the procedure
for a period of inactivity using the Task Scheduler.
The Task Scheduler
should be one of the small icons on the bottom right of the Windows opening
page (the desktop).
Some lockups and
screen freezes caused by hard disk problems can be solved by reducing the
read-ahead optimisation. This can be adjusted by going to
*
Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.
Hard disks will
slow down and crash if they are too full. Do some housekeeping on your hard
drive every few months and free some space on it. Open the Windows folder on
the C drive and find the Temporary Internet Files folder. Deleting the contents
(not the folder) can free a lot of space.
Empty the Recycle
Bin every week to free more space. Hard disk drives should be scanned every
week for errors or bad sectors. Go to
* Start-Programs-Accessories-System
Tools-ScanDisk
Otherwise assign
the Task Scheduler to perform this operation at night when the computer is not
in use.
5 Fatal OE
exceptions and VXD errors
Fatal OE
exception errors and VXD errors are often caused by video card problems.
These can often
be resolved easily by reducing the resolution of the video display. Go to
*
Start-Settings-Control Panel-Display-Settings
Here you should
slide the screen area bar to the left. Take a look at the colour settings on
the left of that window. For most desktops, high colour 16-bit depth is
adequate.
If the screen
freezes or you experience system lockups it might be due to the video card.
Make sure it does not have a hardware conflict. Go to
* Start-Settings-Control
Panel-System-Device Manager
Here, select the
+ beside Display Adapter. A line of text describing your video card should
appear. Select it (make it blue) and press properties. Then select Resources
and select each line in the window. Look for a message that says No Conflicts.
If you have video
card hardware conflict, you will see it here. Be careful at this point and make
a note of everything you do in case you make things worse.
The way to
resolve a hardware conflict is to uncheck the Use Automatic Settings box and
hit the Change Settings button. You are searching for a setting that will
display a No Conflicts message.
Another useful
way to resolve video problems is to go to
*
Start-Settings-Control Panel-System-Performance-Graphics
Here you should
move the Hardware Acceleration slider to the left. As ever, the most common
cause of problems relating to graphics cards is old or faulty drivers (a driver
is a small piece of software used by a computer to communicate with a device).
Look up your
video card's manufacturer on the internet and search for the most recent
drivers for it.
6 Viruses
Often the first
sign of a virus infection is instability. Some viruses erase the boot sector of
a hard drive, making it impossible to start. This is why it is a good idea to
create a Windows start-up disk. Go to
*
Start-Settings-Control Panel-Add/Remove Programs
Here, look for
the Start Up Disk tab. Virus protection requires constant vigilance.
A virus scanner
requires a list of virus signatures in order to be able to identify viruses.
These signatures are stored in a DAT file. DAT files should be updated weekly
from the website of your antivirus software manufacturer.
An excellent
antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com).
Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).
7 Printers
The action of
sending a document to print creates a bigger file, often called a postscript
file.
Printers have
only a small amount of memory, called a buffer. This can be easily overloaded.
Printing a document also uses a considerable amount of CPU power. This will
also slow down the computer's performance.
If the printer is
trying to print unusual characters, these might not be recognised, and can
crash the computer. Sometimes printers will not recover from a crash because of
confusion in the buffer. A good way to clear the buffer is to unplug the
printer for ten seconds. Booting up from a powerless state, also called a cold
boot, will restore the printer's default settings and you may be able to carry
on.
8 Software
A common cause of
computer crash is faulty or badly-installed software. Often the problem can be
cured by uninstalling the software and then reinstalling it. Use Norton
Uninstall or Uninstall Shield to remove an application from your system
properly. This will also remove references to the programme in the System
Registry and leaves the way clear for a completely fresh copy.
The System
Registry can be corrupted by old references to obsolete software that you
thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System
Registry and remove obsolete entries. It works on Windows 95, Windows 98,
Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and
Windows 2000.
Read the
instructions and use it carefully so you don't do permanent damage to the
Registry. If the Registry is damaged you will have to reinstall your operating
system. Reg Cleaner can be obtained from www.jv16.org
Often a Windows
problem can be resolved by entering Safe Mode. This can be done during
start-up. When you see the message "Starting Windows" press F4. This
should take you into Safe Mode.
Safe Mode loads a
minimum of drivers. It allows you to find and fix problems that prevent Windows
from loading properly.
Sometimes
installing Windows is difficult because of unsuitable BIOS settings. If you
keep getting SUWIN error messages (Windows setup) during the Windows
installation, then try entering the BIOS and disabling the CPU internal cache.
Try to disable the Level 2 (L2) cache if that doesn't work.
Remember to
restore all the BIOS settings back to their former settings following
installation.
9 Overheating
Central
processing units (CPUs) are usually equipped with fans to keep them cool. If
the fan fails or if the CPU gets old it may start to overheat and generate a
particular kind of error called a kernel error. This is a common problem in
chips that have been overclocked to operate at higher speeds than they are
supposed to.
One remedy is to
get a bigger better fan and install it on top of the CPU. Specialist cooling
fans/heatsinks are available from www.computernerd.com or www.coolit.com
CPU problems can
often be fixed by disabling the CPU internal cache in the BIOS. This will make
the machine run more slowly, but it should also be more stable.
10 Power supply
problems
With all the new
construction going on around the country the steady supply of electricity has
become disrupted. A power surge or spike can crash a computer as easily as a
power cut.
If this has
become a nuisance for you then consider buying a uninterrupted power supply
(UPS). This will give you a clean power supply when there is electricity, and
it will give you a few minutes to perform a controlled shutdown in case of a
power cut.
It is a good
investment if your data are critical, because a power cut will cause any
unsaved data to be lost.
BY: MISBAKH AHMAD RANJHA
0 comments: